April 5, 2019
Description
*** NEW EXPEDITION CAMPING TRAILER available on cults! ***
You might want to have these wheel chocks I have designed:
https://www.thingiverse.com/thing:3589070
Added another spring. It´s stiffer and can carry lots of load. Currently I only use 2 parts of it, but you can add the middle element, too.
Top boxes with vents and lights added. You need a bigger printer for these, 120mm is way too small.
Bumper added. Two rear lights will take 5mm LEDs.
Fenders added.
Optional single piece axle added for bigger printers, so you don´t need to assemble. Should be tougher, too.
I mounted a small roof rack and I love it... Something like this:
#########################
1:8 to 1:10 scale trailer for r/c crawlers. Fits nicely to SCX10, TRX4 & co. (trailer hitch for TXR4 included).
Some STLs require a bit of support, no brims needed. I intended to design the parts as printer-friendly as possible. You will have to rotate them, however, to lay flat onto the bed.
Any printer with 120mm or more will do, I printed on the MP mini.
4x 6700 bearings; 15x10x4
screws (DIN912):
1x M3x25
12x M3x16
16x M3x20
2x M4x30
2x M4x8
nuts (DIN985):
22xM3, Nylonkern
wheels:
2x Crawler, ca. 96x40
1x ball head (I used a Schumacher model).
License:
Creative Commons - Attribution - Non-Commercial - Share Alike
FarmersMark
