NHL Hockey Puck Buddy - Custom/Personnal Team Logo

Hockey Puck Buddy with Colorado Avalanche and the classic Quebec Nordiques. Can possibly make other team logos upon request. Can do logos with up to 5 colors as long as one of them is black (just like the Avs one, which has 5 total colors with single AMS unit). If there are more than 4 colors without black, it may need to be modified. Makes a great office decoration or a gift! 

Newly added: Toronto Maple Leafs, New Jersey Devils, New York Rangers, Pittsburgh Penguins, Minnesota Wild, Ottawa Senators, Carolina Hurricanes, Edmonton Oilers, Nashville Predators (deleted, thank your fellow fans), Tampa Bay Lightning, Utah Mammoth, Detroit Red Wings, Winnipeg Jets, Calgary Flames, St Louis Blues, Boston Bruins, Dallas Stars, Philly Fliers, Vancouver Canucks, Hershey Bears

Per request: Added blank hockey puck buddy with attached arms and articulated legs. 

Can possibly do custom/personnal pucks! - See comment section and print profiles for custom pucks created for several users. 

Read Carefully for Avs (Wild is similar) puck: Start the print with Black, White, Blue, and Silver. Select 5th color in the black AMS slot (see below). A pause has been added for the Avs puck. When it pauses, hit resume so the black purges and retracts, and after it retracts, put in 5th color (Burgundy or something similar. I used Flashforge Abyssal Red). It should be printing White while you are making the swap, so make sure to start the print with White in an AMS slot. The pause was added to get you ready to change the filament. 

No glue required! The arms and articulated legs are by @Cayouche and is sized to fit the puck. After printing, push the arms in the holes while twisting at the same time (making sure thumbs are facing puck and fingers are forward, lol). Make sure the bottom of the hands are level with the bottom of the puck. It is a very snug fit. The legs fit much easier. You can use a light amount of glue for the legs if you want, but do not glue the arms in. 

For other fun Holiday and random prints, visit https://makerworld.com/en/@Hockey_Dad

Any questions or requests, please ask. 

Please leave a review!