Bedside Caddy for Books and Phone Storage

Holder for small books and phones, mounting to the bed frame. Both Solid and Honeycomb first as 11/16" spacing (my bed) and 50mm length on the arm (just under 2"). Back pocket is 40mm in depth and front is 20mm, and both are 156mm in width.

EDIT 3/21/2025: Added multiple options in Imperial / US Standard and Metric, all in either solid or honeycomb.

US Standard: 11/16", ½", ¾", and 1" for overhang (2" arm length)

Metric:  18mm, 20mm, 22mm, and 25mm for overhang (50mm arm length)

Print with support trees for the back holder / overhang (Use tree(auto) and 30 as threshold angle). Works best printed with its bottom on the print and support trees supporting the overhang. Printed the honeycomb version on its side the first time and would have been better like I printed the solid version.

If there is a strand or two potentially lower on the arm overhang, easy to snip. This portion will be hidden when on the bed frame too.

STEP files of each also uploaded for easy modification, if you make any changes for your bed type please share with attribution!