Graded Card Hanging Holder Protector

Graded card lanyard holder.

Tested with CGC and PSA.

FIt is snug with slab in sleeve.

Some filament color shrink differently. Slide the back panel in and out a few times before inserting the slab. This will loosen the back plate up a bit if it is a tighter fit. It was very tight when I printed it in white and slid nicely when I printed it in black.

Designed to protect slab without a ton of movement. 

Keyring used to keep slab secure. Holder includes place for 6x2mm magnets but are not needed with the use of a key ring.

 

Boost MeIf you enjoy my designs, please follow and give this model a boost. It helps me keep creating new designs.

 

Lanyards

https://a.co/d/9x8lKkP

 

Split Key Rings

https://a.co/d/5aFEViX

 

6x2mm Magnets

https://a.co/d/77z7eeY

 

I recommend using loctite gel control or gorilla glue clear for the magnets. (not needed if you use a keyring)

 

Loctite Glue

https://a.co/d/5Irv5LR

 

Gorilla Glue

https://a.co/d/hhCdhW1

 

Commercial License Available on my Patreon

https://www.patreon.com/cincinnatisquirrel

 

If you would like a card holder and are unable to print yourself; it is available on my Etsy shop. Or just message me.

https://cincinnatisquirrel.etsy.com