Eibos Easdry Wall Mount with Thermometer

Version 2 - I added cable clips to hold the probe cable, and moved the screw holes.  Note, the tolerance for the hole for the probe is a bit low - I needed to use a debur tool to open it up just a touch.  Suggest adding a negative part if you don't have a debur tool.  Be careful cleaning supports around the cable clips as they are easy to break.

 

---

 

This is a remix of the Eibos Easdry Wall Mount, printed in PETG.  I added a mount for the commonly available thermometer, along with a hole in the back of the thermometer mount for the probe.  A future enhancement to this would be to add some clips for the wire - I added a few stick on ones after the print, but would be nice if it were built in.  I may do that at some point.

 

I merged these two models:

https://makerworld.com/en/models/22507-eibos-easdry-wall-mount#profileId-202958 

https://makerworld.com/en/models/397137-skadis-hygrometer-holder#profileId-298494

 

The thermometer used is similar to this one:
https://www.aliexpress.us/item/3256804788484423.html 

 

Boost MeIf you like this model, please consider giving it a boost! It helps encourage me to continue supporting the community, and helps others find this design!