March 24, 2025
Description
I have been working on this model for very similar days on Blender, I wanted to make a bigger model of the HMS victory to display on a shelf but, I decided to Print it in a smaller scale first for easier displayable and also to find ways to improve the final model before the big print. With this being said, this model is still on the works as I improve my blender skills and the frame of the ship before I can put everything together for a bigger scale, so I will be constantly updating this model as changes come and eventually I will be posting a bigger scale.
This model is a one plate model, meaning, you will be able to print everything at once, make sure you have some PLA ready glue with you. As you can see on the image below, the masts are split in two for better and easier printing, once the model is ready, snap each mast together and glue them, it is very easy to see what two sides of every mast goes together with which one since they are pretty much next to each other, once all the masts are glued together, they will be installed in the boat by using the wholes on the frame, the mast at the bottom of the plate goes in the front whole or 1, the one in top of the boat frame goes in the middle or 2 and the one on top of the plate goes last or 3. The two pieces on the bottom left go together and make up the foremost Mast
Version 1.0
License:
Standard Digital File License
allstarofficial
