Wooden Bench

Note: Originally published on another site, moving here at various requests. 

You can scale this to your needs; it is currently sized to around 350mm wide, 120mm deep, and 105mm tall. Assembly is straightforward. I used glue to hold the boards in place in the supports. I printed the boards in a wood PLA and then stained them. To print this model, you need to print 2 Bench Braces and 3 Bench Boards. 

To make the boards sturdy, I printed the boards with 20% infill and thick walls. 

Not sure this will scale to a very small size well, but if you try it, leave a comment and let us know how it went. You can shorten the bench by shortening the length of the boards in your slicer; you may not want to make them longer, not without adding a 3rd brace in the middle. 

Enjoy, and please share your makes!