EcoFlow Extra Battery Cable XT-150 Cover

This cover is designed to protect the end of the "EcoFlow Extra Battery Cable" which is a proprietary XT-150 connector design. There is no commercially available cap for this cable and I wanted to protect the battery from a short circuit when the extra battery is unplugged. The cover slides on easily and is held in place with small tabs on the inside that catch the external profiles of the plug. There are a couple small knobs on the outside that help to pull the cover from the cable. This cover also work on the 90 degree cables with the same connector. The cover was printed in both PLA Matte and PETG-HF for test fitting. Revision 1 of this cover added a small tab and hole to attach a lanyard. The interior geometry was not modified for this revision.