Premium Insert for Mansions of Madness 2nd Edition

 

Premium Insert for Mansions of Madness 2nd Edition!

IMPORTANT!

To assemble the insert, additional components are required:

• 16 x round neodymium magnets (6x2mm) - we recommend using magnets with a grade of at least N38 (the same ones we use) to ensure the parts are held securely in place.
• 14 x M3x10mm screws (or slightly shorter)

Please note that four elements of the set (small box top, small box bottom, big box top, big box bottom) have been designed with print stops at the end of the printing process. This allows magnets to be placed inside and then covered with a filament layer once printing resumes (as shown in the picture).

 

Print tip: We recommend using a small amount of glue to secure each magnet in place before resuming the print. This helps prevent the magnet from being pulled out by the hotend. After resuming, observe the print closely for a few layers to make sure the magnets stay in place and react quickly if any come loose.

 

 

For easier magnet installation, you can use our custom-designed magnet mounting tools – just click the image below to access the model.

Ran into an issue at the final stage of printing large boxes - or did your magnets snap onto the extruder? No worries!

If for any reason you encountered problems and couldn’t properly place the magnets in the slots of large boxes, try our repair kits available within one of the print profiles. We recommend removing the original magnet slot (e.g., with a sharp tool, a heated soldering iron, etc.), then printing our repair kits with magnets and gluing them to the edge of the box. While the aesthetics may be slightly reduced, this solution should save your prints and let you enjoy the insert’s full functionality.

 

Insert Features:

• Excellent organization – Every game component has its own designated space: cards, miniatures, boards, tokens, dice – everything is within easy reach!
• Faster game setup – With this insert, the game is ready to play in minutes – no more mess or rummaging through ziplock bags!
• The dice drawer is designed to double as a rolling tray.
• Magnetically secured grids – The protective grids are mounted with invisible magnets, improving aesthetics and ensuring easy access to the contents.

Set Contents:

• A four-piece box insert, including:
  • The largest section with drawers
  • A section with pull-out monster trays
  • A section for the dice drawer
  • A section for rectangular terrain tiles
• 14 drawers, including:
  • 6 for cards
  • 6 for tokens
  • 1 for character cards
  • 1 serving as a dice rolling tray
• 5 trays for monsters/heroes with a specially designed locking mechanism for secure storage and easy access to miniatures (We recommend using a rubber band for hero figurines to secure them better on the base)
• 2 protective grids mounted with invisible magnets
• A filler piece for the square terrain tile compartment to prevent shifting during storage

The card drawers are designed to fit 70-micron sleeves (Sloyca Mini American 41x63mm, thickness 70 microns).

 

Very important: We recommend placing the monster/hero trays as shown in our pictures. The slots have different heights, so some monsters or heroes may scratch the upper tray if they are not placed properly.

 

After print information (not necessary to use):

The hero tray includes an additional hook that allows the use of an elastic band to secure the hero figures and prevent them from sliding out;

 

Looking for More Ways to Enhance Your Game?
Make sure to check out my custom rubber plugs for monster tiles—perfect for keeping name and description tokens securely in place on figure bases during gameplay. They’re a great companion to this insert and are available among my other models. Don’t let your monsters lose their identity mid-game!

 

(click the picture to open mentioned model)

Looking for insert with all Mansion of Madness expansions?

Check out the link below to see our second insert model, which fits the Mansions of Madness base game along with all five expansions: Beyond the Threshold, Streets of Arkham, Sanctum of Twilight, Horrific Journeys, and Path of the Serpent.

 

(click the picture to open mentioned model)

Looking for an investigation board?

If you enjoy our insert for Mansions of Madness Second Edition, be sure to check out our Premium Player Board designed to enhance your gameplay experience. This board helps you keep your investigator cards organized and introduces Health ❤️ and Sanity 🧠 trackers, so you no longer need to count damage or horror cards during the investigation. Perfectly designed to complement our insert and bring even more Lovecraftian atmosphere to your table as you explore haunted mansions, uncover dark secrets, and try to keep your mind intact… 👁️🗨️🏚️

 

(click the picture to open mentioned model)

Looking for an insert for the Suppressed Memories / Recurring Nightmares expansions?

If your investigators are brave enough to venture deeper into madness, you may also be interested in an insert designed by IkesCreations in the same style for the Suppressed Memories / Recurring Nightmares expansions. Thanks for creating an insert for these expansions, especially since they are extremely difficult to find here in Poland ;)

(click the picture to open mentioned model)

Boost MeHey Makers! 🎨🛠️ If you enjoy our 3D models and find them useful, consider giving them a Boost! Your support helps us create more high-quality designs, improve existing models, and share even more creative ideas with the community. Every Boost motivates us to keep innovating and bringing fun, functional, and unique designs to life.

Thanks for being awesome – happy printing! 🎉😊
M&G