Noodles Dispenser Stackable

Boost MePlease boost me and give thumps up to support my work. I appreciate all the support I can get from you. Thanks in advance.

Noodles Dispenser that is stackable. Each one will holds 2 x 5 instant noodles packs. So you can have different tastes of noodles easy at hand. If you just want one there is lid for it and if you want to have two or more you only need one lid for the top dispenser if you stack them.

 

I have printed them in both 0.4mm nozzel and 0.8mm nozzel and the pictures are showing one of each when stacked.

 

I can recomend getting a 0.8mm nozzel to print bigger things as you will save a huge abount of time and also some filament. I also use variable layer hights in my settings.

 

I have Included all my settings for my Pinter Preset, Filament Preset, if you calibrate any filament it should work just as good as mine, and Print Process in the 3mf files so you get all my settings and it should make thinge easier for you to print with very good result.

 

Difference in 0.4mm and 0.8mm:

 

0.4mm:

About 13h 2m to print dispenser and use about 416gram of filament
About 1h 47m to print lid and use about 81gram of filament
Total: 14h 49m to print and use about 500gram of filament

 

0.8mm:

About 4h 25m to print dispenser and use about 346gram of filament
About 58m to print lid and use about 67gram of filament
Total: 5h 23m to print and use about 413gram of filament

 

 With 0.8mm, and my settings atleast, I'm saving about 66% print time and about 17% filament. You can see the difference in printing time on the last picture where I'm printing both 0.4mm and 0.8mm model side by side and how much faster 0.8mm is.

 

Dispenser Size:
Size: 239mm x 146mm x 192mm

 

Lid Size:
Size: 239mm x 146mm x 2mm