I went a little crazy and gave myself all the clearance I could with HC links. Curvy and proud. Compatible and developed for two front axle set up (rear steer), but can be used normal(boring) style with a rear axle. Driveshaft angled up and out of the way as much as possible. Only made the set for the rear being the most necessary.Â
I did also play around with the front upper links geometry to improve front driveshaft angle.Â
Also included is a pair of steering links for different height servo horns since some stick out more then others. One is curved for shorter servo horns.
Second photo shows how I mounted the links. Plates are labeled by link length and type.
Lots of trial and error to make then easily compatible with regular link ball end bushings. You must use either the stock plastic link bushings or the brass ones that come with ball end kits. You can print my other design RC SHOCK AND LINK WRENCH to help easily assemble the links. Hope you enjoy! Happy Tiny trucking
Can be used with stock builds, IF YOU REPLACE BOTH UPPER AND LOWER REAR LINKS. Stock builds should probably use the optional shorter link on the separate plate.Â
MOMO_RC
