Cup Dispenser

I designed this cup dispenser to use in my cabinet at work. 

They are compostable cardboard cups and their size is 58mm on the top edge and 54mm on the bottom as you can see in the photo below. 

Scale it as you like if you have different sizes. 

Inside there are 3 printing plates, one with the lid, one with the central tube and one with a lower clamp that screws on the tube, this is because if the teeth of the clamp break, you can reprint only that part without printing the entire model.

On the back of the tube there are 2 through holes and 2 transverse holes to fix it with screws or cable ties.