Ice Cream Pint Holder

Pint Ice Cream Holder

I was asked by my wife to design a pint holder for her ice cream so after a few prototypes here it is. I designed this with Stewart's pints in mind and tested it with N¡ck's pints and glad to say they fit perfectly. Ben and Jerry's should be the same size according to their website. Same for Häagen Dazs. I also tested every spoon we had in the house and they all fit too though I prefer the small spoon the best.  Supports are needed for the handle. 

 

Revised 5/3/2025

Based on user feedback I made the hole for the pint larger at the bottom and more narrow on the top.  The pint now seats  all the way to the bottom.  if it's too loose for your pint, they are not all the same size depends on your brand of choice, reduce the x and y by 5% and use the measure tool to see if that's a better fit.  I wouldn't recommend reducing the z axis as it'll make the holder too short.  I tested this out on both N!ck's pints and our local brand of Stewart's ice cream both fit perfectly.  

 

Revised 8/10/2025

 

Added a profile with a fatter handle because i like a wider handle and because I was asked to make it bigger.  Otherwise the profile is the same as the V6 profile. 

 

I left the original design as some brands do fit that one better.  Thanks to all those who reached out with constructive criticism, it's much appreciated.

Boost MeIf you enjoy this model please consider giving me a boost.