Paintbottle carrier for long type paint bottles

This is a paint bottle rack & carrier for paints such as Army Painter of Vallejo. It features a fold open rack with printable hinges, mounted in a fun design carrier which uses printable latches to hold the racks in place. One carrier can hold 30 bottles, and the carriers are stackable. All parts are designed with printability in mind, making sure there is an optimal printing orientation for the least amount of required support.

Printing recommendations: 

• print the shells with their rear on the build plate for fastest printing with minimal support
• print the racks with their touching sides on the build plate
• don't forget to print the latch brace and clip as one part (example provided)

The test print, featured in the images, was printed with a Bambulab P1P, without problems. 
Glue may be required depending on your printer's accuracy and tolerance. The biscuits are there to be glued in place and give some structural integrity to the whole.

I will make different mesh versions and different racks at a later date.