Turn every personalized sign into instant, wearable flair!
This two-part Clip-Card Badge Holder is precision-matched to the blank plate included on this page (credit-card size 85.60 × 53.98 mm, 1 mm thick, 5mm corner radius). Just print the holder, press Customize, and Make-My-Sign opens with the ready-sized plate—draw, print, and slide it in. No glue, no screws, just click-n-clip.
- Tailor-made fit – rails are tuned for this plate’s exact dimensions; 1 mm stock slides in with satisfying friction.
- Clothes-friendly clip – rounded jaw hug fabric without snagging; strong enough for jackets, gentle enough for T-shirts.
- Light, one-part supports – only the holder body needs minimal auto-supports; they pop off in seconds. The clip arm prints totally support-free.
- Color-play ready – pair the plate with multicolour AMS prints or run the holder in a contrasting filament.
Print Tips
- Holder-Body - 0.16 mm layer height, supports enabled (normal, auto)
- Clip-Arm - 0.16, no supports required
- Filament: PLA
Weight: ~ 12 g in total; ±30 min on a Bambu Lab A1 mini.
How to Use
- Print both parts (holder supports flick off—no sanding needed).
- Snap the clip arm into the hinge pocket until it clicks.
- Customize → your blank plate opens in Make-My-Sign → add artwork → print.
- Slide the finished plate into the rails until flush.
- Clip-on and show off your creation!
If you remix or resize, link back here so others can discover the original.
Enjoy—and don’t forget to post your make & boost if this holder keeps your sign shining!
Boost MeIf you liked this model, give me a boost!
NozzleNoodle
