10-inch racks cable duct with cover

Cable duct for 10-inch racks. 

This allows for clean horizontal cable routing.

There are two versions of the front panel:

with holes: allows cables to be routed through the back.

no holes: cables must be routed through the sides.

There are four versions of the cable duct: 

Low fully closed 

Low with 50% open cable outlets 

High fully closed 

High with 50% open cable outlets

In the high version, the cross-section of the cable duct is larger.

The cover fits all cable ducts.

To mount the hooks, you will need:

 10 x M3 threaded inserts like these ==> M3 threaded inserts

 10 x M3x8mm screws 

I printed it with PETG-CF and PLA. Both work well.