Adjustable Wall Mount for HPes / HPer Monitor

You’ve probably been there: everything carefully measured, the spirit level says it's straight — but once the installation is done, you step back and realize... it’s all crooked. The level wasn’t placed right, and your perfect setup is now off.

This mount offers the solution.

Designed for HPes/HPer monitors, this two-part wall mount allows for post-installation adjustment. That means even if the mounting plate isn’t 100% level, the monitor can still be aligned perfectly afterward.

How it works:

• The mounting plate is the first part. Two M4 screws are glued into it from the back. To do this, you'll need to drill a countersink into the holes so the screw heads sit below the surface.
• The plate is then fixed to the wall using mounting adhesive.
• The second part, the actual bracket, is attached to the mounting plate using two M4 screws. These screws allow for fine adjustment and alignment after installation, ensuring your monitor hangs perfectly straight.

Perfect for anyone who wants a forgiving, flexible mounting solution — no second-guessing your spirit level required.

Boost MeDo you enjoy this model? You can help me grow as a designer by using MakerWorld's Boost feature—for free! Boosting increases the visibility of my work, helping more creators discover it. Simply click "Boost" on this page to support my designs without spending a dime. Every boost makes a difference—thank you for your support! 🚀