bambu X1C\P1S 控温净化器-【筋斗云】

2025-0405-特别说明：
我从未在任何平台售卖这款抽风净化器，也没有售卖任何代打，目前中国国内淘宝，闲鱼等平台售卖比较多，销量好几百的比较好的，均为未经授权使用我制作的说明图片，甚至去掉了作者logo和出处，这是严重侵权的，请保留原创作者出处@jindouyun（筋斗云设计）。

2024-0226更新
很多人提到机箱风扇出口的转接头固定螺丝型号，我是取自拓竹附送的配件包内具体哪个包忘记了，所以我提供螺丝的照片和尺寸

A lot of people mentioned the chassis fan outlet adapter fixing screws model, I was taken from the Top Bamboo included in the accessories package specific which package forget, so I provide photos and dimensions of screws

详细介绍都在视频里https://www.bilibili.com/video/BV1Rw411m7kg/?spm_id_from=333.999.0.0

3D打印机在打印中都会产生pm各种直径的颗粒，甚至很多廉价耗材或者高性能耗材都会在打印中产生有毒有害气体，而打印机很多时候是几乎24小时候运行，玩打印机更需要关注呼吸健康，所以为了解决我自己问题于是我设计了这款控温净化器，我现在几乎每次打印都在使用，降噪、控温、净化很不错，如果你有兴趣正好可以帮到你，欢迎随时直接一键打印。（deepl translation：3D printers in the printing will produce pm various diameters of particles, and even a lot of cheap consumables or high-performance consumables will produce toxic and harmful gases in the printing, and printers are often almost 24 hours a day to run, play the printer need to pay more attention to the respiratory health, so in order to solve my own problems so I designed this temperature-controlled purifier, I'm now using it almost every time I print, noise reduction, temperature control Purification is very good, if you are interested in just can help you, welcome at any time directly a key to print!

）

注意下：请在打ABS，符合，碳纤维等性能填充材料完成后需要保温环境时，关闭净化器，等打完再开启抽风过滤。

以下是需要购买的配件：（Note the following: please turn off the purifier when you need to keep the environment warm after you finish hitting the performance filler materials such as ABS, conformity, carbon fiber, etc., and wait until you finish hitting it before you turn on the extraction and filtration.

The following are the accessories that need to be purchased:）