H2D/H2S/H2C Build plate Holder V2

V2 Bambu Lab H2D/H2S/H2C Build Plate Holder 

After feedback from our initial build plate holder https://makerworld.com/en/models/1354474-h2d-build-plate-holder#profileId-1397790 we adjusted the holder to ensure the plates are held more securely and prevents them from contacting the side of the H2D/H2S/H2C during printing.

 

I recommend printing the holder out of PETG or ABS as the heat from the H2D when chamber temperature is at 65 degrees could cause the model to deform slightly due to it's contact with the printer

 

 

This plate holder holds 2x plates and integrates seamlessly with the H2D/H2S/H2C. It utilizes the two cut-outs at the base of the printer to save space while also ensuring the holder is stable. 

 

Both slots are 1.4mm wide so can accommodate the PEI & Textured plate

 

New 3 Plates and 1 Cutting Mat Holder Version Notes:

This version accommodates the larger cutting mat plate. The slot closest to the printer has been made larger to fit this plate. The other 3 slots are still 1.4mm wide so will NOT be able to store the cutting mat plate. 

 

Boost MeIf this model was useful to you, please consider leaving a boost !