1861 Dahlgren 12 Pounder Civil War Cannon

This is my miniature replica of an 1861 Dahlgren 12 pounder Cannon as used in the American Civil War.

This 12 pounder cannon was named after its designer, Rear Admiral John A Dahlgren “ The father of American Naval ordnance” who was born in Philadelphia 13th November 1809.

I've used Brown and Metal PLA for the print which turned out great.

Prints on 4 plates and only the main carriage required minimal support.

For a more authentic look as the model is for an history exhibition I've finished the Cannon with 2.5mm and 2mm Galvanised wire for the Handles/ Wheel Axle Pins and also the  Rammer and Ladle holders as in the photos.

To assemble, the axle beam is secured to the main carriage with CA Glue, the outer rings can be glued to wheels and the wheel inserts secured with CA Glue, the pins for the wheels are just push in.

The Carriage hook and rope holder are secured with CA Glue.

The Barrel and Axis are now fitted the Axis is pushed through the barrel and 2 spots of CA Glue on the bottom of the pins to hold in place, the barrel straps are secured with CA Glue.

Thanks for Looking.