May 29, 2025
Description
These are wheel/tire inserts for Injora 1.0" rims and Injora 62mm - 64mm tires designed to be printed in TPU-87A.
They have an alternative pattern compared to my other wheel/tire inserts and i took some inspiration for this new pattern from the Injora Silicone inserts.
Compared to my other inserts these trade some stability for more squish and are a bit softer in all regards/force directions but they are also more predictable because there are a lot more spokes so the forces are much more evenly distributed.
The insert has an outer diameter of 58mm and a width of 18mm, the inner diameter is 28.5mm to have slight press fit on the Injora rims which also have an outer ring diameter of 28.5 mm but with random seam position its a perfect fit without preloading the insert.
These inserts were tested with Injora's 1.0" 64*24mm Rock Crawling tires, i cant say much about fitment with other tires but taking Injora's tire list as reference from their inserts, they should probably fit all these tires:
I strongly suggest to print them in TPU-87A because the spoke design and the cutouts were designed to work and behave with this softness in mind, harder filaments are not flexible enough, I've tested them in TPU-91A which was already too hard for the inserts to work correct.
They can also be printed in TPU-85A for an even softer insert.
No brimm or support needed but you will get a lot of stringing because of the design.
Wall generator needs to be set to Arachne or it wont be able to slice the fine lines correct.
For reference, the MB24 in the picture weights about 565g with a 64/36 weight distribution.
Added stl, step and Fusion 360 files in case anyone wants to change something.
License:
BY-NC-SA
Beni Stingray
