Deadmoon Glasses - OverTheTop

Update: I cut the lenses out from a $7 face shield from Amazon and super glued magnets to make the lenses snap into place. 

Durable, flexible, comfortable, wearable, print-in-place, and easy to remove supports.

Inspired by Oakley's Over-The-Top shades. Printed in iron gray metallic PLA, 50% speed, and with a 0.6mm hotend (any will work). I had several people try it on and everybody was surprised by how comfortable it is!

NOTE: In order for this to print perfectly please refer to the print profile settings and recommendations. I also uploaded a photo with the support settings (minor changes). 

Infil 15-20%, 3-4 walls, Tree Supports, Threshold angle set to 35 degrees, glue stick the build plate, print at 50% speed