Sleep Token - Take Me Back To Eden Album Art

Boost MeBoosts help me to make more designs like this.  If you enjoy this poster, please consider giving me a comment, like, or boost! :)

Hueforges can be resized by adjusting only the X and Y scale—leave the Z height unchanged for best results.
 

Hueforge art inspired by the album art for Take Me Back To Eden by Sleep Token

A modified version of the album art by Sleep Token resized to fit my standard sized HueForge poster design.  Each print is 133x200mm.

These prints display wonderfully with a 3d printed HueForge stand, such as the middle size shown here (as shown in the print photos):
https://makerworld.com/en/models/153050-3-collapsable-stand-sizes-hueforge-etc?from=search#profileId-167215

Full Credit to @Lumpy3D for inspiring me to finally bite the bullet and put some of my creations out there.
 
Project: ST-TMBTE.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 132.98x200mm in size
You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 2.24mm and the Actual Thickness is 1.64601mm
 

Filaments Used:

• PLA BambuLab Basic Black Transmission Distance: 0.6
• PLA BambuLab Basic Beige Transmission Distance: 8
• PLA BambuLab Basic Jade White Transmission Distance: 5

This print uses 3 unique filaments
 

Swap Instructions:

• Start with BambuLab Basic Black
• At layer #8 (0.72mm) swap to  BambuLab Basic Beige
• At layer #14 (1.2mm) swap toBambuLab Basic Jade White for the rest