Arrma Typhon 223s/3s BLX Front LED Bumper/Bullbar

Only Print with Nylon or stronger impact resistant Material if you want to actually use it, other materials such as PLA, ABS. ASA and PC will not survive more than 1 crash and you will just be wasting material.

 

 

First remove the stock bumper, install the  bumper adapter using some m3 screws to the car.

 

 

Then install the Bumper joiner onto the bumper adapter with some self tapping screws.

 

Then align and install the Front bumper to the bumper joiner. Screws on in on the sides.

 

You will need self tapping screws of m2.5 size and M3 long screws.

 

You will need the following LED and the LED cover from this Losi SBR 2.0 Part: Losi 1/6 Super Baja Rey 2.0 Front Grill & LED Light Set

 

Boost Me