Cesare - Planet of the Apes Hueforge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.2mm

The Model is 135.92x200mm in size
You may print at higher layer heights below the Base Thickness of 0.68mm
The Max allowed Thickness is 2.44mm and the Actual Thickness is 1.72mm

Filaments Used:
    #000000 PLA BambuLab Basic Black  Transmission Distance: 0.6
    #545454 PLA BambuLab Basic Dark Gray  Transmission Distance: 0.6
    #ffffff PLA BambuLab Basic Jade White  Transmission Distance: 5
This print uses 3 unique filaments

Swap Instructions:
    Start with Black
    At layer #8 (0.76mm) swap to Dark Gray
    At layer #9 (0.84mm) swap to Jade White for the rest.