Dodge Grand Caravan Camper Miniature Template

Using this model to plan a miniature version of a camping setup I built last summer.

Spent many hours in Bambu Studio cutting and hollowing out Scinor's model to make a version where each side can be removed for visibility, also added inserts to put magnets in.

The seats are from R4z0r1007, and the wheels by maximilian.zupanic, used a 0.2mm nozzle for the small details and rim, these cannot be printed with a 0.4mm nozzle, keep that in mind before starting the project. There's a small cylinder in the file on the last plate to connect the wheels with the car using super glue.

The magnets approach is a bit tricky to align once finished, I used some cotton a super glue to place them in the right position, the magnets I used are 4mm diameter and 2mm thick. If I had to do it again I would probably just use velcro to attach the side pieces. Please keep in mind that this project requires more than just printing the parts, you'll have to mess around with glue and magnets/velcro in order to have the final product.