Mini Hornet from Hollow Knight

A mini of Hornet from Hollow Knight

A simple mini of Hornet. 

 

Get the whole gang

 

Pure Vessel

Get Cornifer here!

 

A smaller cute Hornet


Some users experienced difficulty in attaching the legs to the base, I have modified the base (making it deeper, flipped it over and turned on ironing; and added a bevel for easier insertion. Also, the head got a little extra support, but I advise you to reduce the speed by 50% if you are using a bedslinger, such as the A1 and a1Mini.

Any issues, please send a comment and I will see about it. Thanks a lot for choosing my model :)
 

 

You will need 6x2mm magnets to attach the head and superglue to glue it together. There is an included pin you can use if you dont have magnets.
 

Insert the body into the dress, there is only one way to make it fit. If it does not, light sanding may be needed to get rid of the elephant foot that is preventing it from fitting, small drop of glue. The legs are glued on to the provided base, again – a small drop of superglue is enough.

 

 

 Join the sword and glue it. Once you have the figurine assembled, you will notice a small hole in the sword. This is where the left hand is glued to it. You are free to pose it different, however I shaped the cloak so it looks like the sword lifted it.

 

Boost Me

 

 

Get the Knight too!