US General Mini Toolbox Wall Mount (heavy duty)

A wall mount for the Harbor Freight/US General Mini Toolbox!

I wasn't able to find a wall mount for the mini toolbox so, here you go. I have been wanting to make a wall mount for these as I had them on a shelf I made (out of wood) but it took up too much space on the wall. 

All you have to do is print out both sides, screw one mount to the wall (make sure its' level!), space out the gap for the toolbox then, mount the other one (make sure its' level to the earth and to the first mount!).

Thanks for stopping by and checking out my file! If you download it and it works out well for you, please rate the profile, leave a comment, boost the model, or do all of the above! And if you don't feel like doing any of those things, I hope you got a useful print that does a good job supporting your box!

Edit: 07/10/2025 - I added a center mount model and 3mf file for all three wall mounts. I had someone request to make a center mount so they could mount their toolboxes side-by-side.

Edit: 07/10/2025 - I also added a few mm to the thickness of the back wall (surface that will be vertical/touching the wall). If you have already printed the original left and right mounts, they will not work with the center mount file. you will, unfortunately need to download and print the new left and right mount so they will line up with the center mount (if you want to mount multiple boxes side-by-side). Sorry about this change if you are wanting to print the center mount. I thought it would be best to make that part thicker because of print variations between printers and wanting the tolerance for the lid to open all the way to be bigger.

Edit: 07/11/2025 - The center mount will work with the original left and right mounts but, the toolboxes will be offset from the wall a little on the side the center mount is.