Enhance your IKEA LESTRA lamp with this custom-designed lamp diffuser – created to perfectly soften and spread light without compromising brightness. Whether you're after a more ambient atmosphere or just want to reduce harsh glare, this 3D printed diffuser is a simple and elegant upgrade.
🔧 Features
Perfect Press-Fit Design No screws or glue required! Just snap it into place and you're done. Tailored for the IKEA LESTRA lamp for a snug, secure fit.
Optimized Light Diffusion With a 0.4mm thickness, this diffuser strikes a balance between translucency and light softening. It provides smooth, even illumination while still allowing enough brightness to shine through.
Test Fit Profile Included Tolerances can vary slightly from one lamp to another. To help you get the perfect fit, a test print profile is included – print it first to check sizing before committing to the full print. If needed, simply scale up or down slightly in Bambu Studio to match your lamp. See instructions below on how to scale the file to fit your lamp.
🖨️ Print Recommendations
Layer Height: 0.2mm
Material: PLA or other standard filaments
No Supports Needed
Infill: 15%
🧩 Included Print Profiles
Full-size diffuser profile
Test fit profile
💡 Instructions
This model was designed specifically for the IKEA LESTRA lamp. While tolerances are generally accurate, some printers or lamp batches may vary – please print a test print first before making the final print!
If the test print doesn't fit properly, click on the model and use the scale function to make it larger or smaller:
Turn off Uniform Scaling
Only change the X and Y axis scale. Leave Z axis at 100% for the correct thickness.
Once the test print fits, take the scale percentage used to achieve the right fit and apply it to the full-size model.
currynoodles
