Clerks - hueforge

Hueforge of Clerks
The photos shows the result in 134.8x200mm and a nozzle of 0.4

Boost MeThanks for your boost!

You can change the X and Y dimensions but do not change the Z dimensions  
You must define the printing parameters indicated in the description below and change the filament on the indicated layers.  
You can use filaments other than those indicated, but the result will differ.  
You can use any black PLA

 

Hueforge description
Print at 100% infill with a layer height of 0.04mm with a base layer of 0.16mm

The Model is 134.8x200mm in size
You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 2.56mm and the Actual Thickness is 2.32mm

 

Filaments Used:
    #000000 PLA BambuLab Basic Black  Transmission Distance: 0.6
    #ffffff PLA BambuLab Basic Jade White  Transmission Distance: 5
    #00358e PLA BambuLab Basic Blue  Transmission Distance: 4
    #c00d1e PLA BambuLab Basic Red  Transmission Distance: 4
    #ff6a13 PLA BambuLab Basic Orange  Transmission Distance: 7
This print uses 5 unique filaments

 

Swap Instructions:
    Start with BambuLab Basic Black
    At layer #12 (0.6mm) swap to BambuLab Basic Jade White
    At layer #25 (1.12mm) swap to BambuLab Basic Blue
    At layer #33 (1.44mm) swap to BambuLab Basic Red
    At layer #41 (1.76mm) swap to BambuLab Basic Orange for the rest.