Stackable Sonos Beam Gen 2 Riser

Stackable risers for Sonos beam gen 2 soundbar. Comes in 20mm (plate 1) and 10mm (plate 2) elevation versions. Matte black Bambu filament looks / matches especially well with the Beam. Haven't tried white on white but feel free to take pics and share since I'm curious!

 

Boost MePlease dry out Bambu's support for PLA filament especially if using it.

 

Used support for PLA material from Bambu Lab in given settings to achieve a smooth finish on the overhang so the stacking is also smooth.

Can be tricky to work with but the number one lesson I learned, especially with support material is keep the filament dry. Works better on larger flat surfaces like this vs. small vertically curved one. Definitely dry it out for 8+ hours or more before a print, keep it in a dry area, and dry again if its been awhile, otherwise it sticks and clumps up. Plus a prime tower helped alot, at least on the H2D.

 

Tested on an H2D but the actual material swapping is minimal since its only a couple horizontal layers of support material for the interface.