"Thick Drip" Deck Box | 100 cards | MtG Case

After the success of my “Thick Drip” 60 sleeved cards deck box, by popular request, here's the 100 sleeved cards version. This version was remade from scratch using the same criteria, but because the sides are larger now I could not simply “stretch” the previous design: I had to create a new one appropriate for the new deck size.

Cards

This deck box fits 100 single-sleeved standard 88 mm x 63 mm cards. This is the default format for Magic: the Gathering and Pokemon cards.

Updates

• Chamfer update (November 5th). With v7, now the “loose” variant is the default. The chamfered lid stopper is the default and included in the v7 profile. Base and lid chamfers have been removed to avoid very tall sleeves bending.

Boost MePaint some colour on my work with a free boost! 

Printing instructions

Choose two of your favourite brightest colours and print each part separately! This deck box comes into two variants:

• Basic variant (sky blue and blue in the sample pictures): only the top and bottom part.
• Droplets variant (dark blue and orange in the sample pictures): top, bottom and the droplets. The bottom part has circular inserts to slot in the droplets after printing.

Printing suggestions

• Suggested plate. Smooth PEI (high-temperature)
• Suggested nozzle size. 0.4mm
• Suggested layer height. 0.2 for a quick print; 0.12 to 0.16 (or adaptive) for more aesthetically pleasing circles

Ironing

In the droplets profile, the droplets have top surface ironing turned on. The ironing settings have a speed of 25mm/s and a flow of 30%. I found that these values work well. If you are unsure or unhappy about the result, turn the ironing off for the droplet objects, or change it to your preferred values.

Assembly instructions

After the feedback I received with my previous deck box, I decided to go with a loose fitting lid. You will need to install eight 8x2 circular magnets for securing the print.