Ghosty holding soda can

---------------------------------------------------------------------------------------------------------------------

Update 1: Had requests for Alani cans. Also had a few requests for one that would work on the A1 mini. I've added two additional profiles to check out. 

The proportions on the one for the A1 mini are skewed, so check the picture before printing. Also it will only hold a mini can of coke/diet coke, not a full size can.  

The Alani one has the correct proportions, but since the can is taller, the bottom of the can will touch the desk to make it look right. see picture. Also note the Alani one will hold a can of mini coke as well, but off the ground. 

Last but not least I do have this open for commercial use, I don't mind if you sell these. Just do me a favor and print it first and take your own picture. Found a marketplace listing where the seller used my exact picture from this post yesterday. Thanks!

---------------------------------------------------------------------------------------------------------------------

Ghost holding a soda can. 

Similar to a popular decor item from Ross/TJmaxx. 

Wife requested this. There were a few other models floating around, but according to her they were “too skinny” and not “adorably plump”. She is apparently very happy with this one and feels I should share lol. 

Holds a full can of any soda of your choice very tightly. I mean tightly. If you try to fit an empty can in his hands, it will be crinkled, but a full can requires no glue or anything to stay in place, which is what I was going for. That being said, you have to work the can in a bit. 

Both models pictured were printed in one color and the eyes were painted with an acrylic marker. I'm going to include a 2 color print profile, but note I haven't printed it this way myself so it may need some tweaking. 

Lastly, due to the height restrictions on P1 and X1 models, this is only printable on the A1 and the H2D, as the Z height is 255mm. You can scale it down more (in Z only, scaling the whole thing would change how the can fits), but I didn't like the way it looked. The Original I printed myself (not pictured) was printed on my SV08 with a z height of 262mm. If you're extremely artistic or want to make your own can, I'm including the original model information in the downloads, where you could print a can and paint it yourself any size. 

Enjoy!