Jeff the Land Shark Hueforge

Inspired by Jeff the Land Shark from the Marvel Rivals video game. This is my take of a Hueforge print.

 

This is my first attempt at publishing a Hueforge profile, so please suggest improvements where there can be improvements. 

 

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.2mm

The Model is 200x200mm in size
You may print at higher layer heights below the Min Depth of 0.52mm
The Max Depth is 2.1mm and the Actual Depth is 2mm

Filaments Used:
    PLA BambuLab Basic Black Transmission Distance: 0.6
    PLA BambuLab Basic Blue Transmission Distance: 4
    PLA BambuLab Basic Jade White Transmission Distance: 5
    PLA BambuLab Basic Red Transmission Distance: 4
This print uses 4 unique filaments

Swap Instructions:
    Start with Black
    At layer #7 (0.68mm) swap to Blue
    At layer #10 (0.92mm) swap to Jade White
    At layer #12 (1.08mm) swap to Red
    At layer #15 (1.32mm) swap to Jade White
    At layer #21 (1.8mm) swap to Blue
    At layer #22 (1.88mm) swap to Jade White for the rest.
 

Boost MeBoost me for free to fuel my habit.