Grid Wall Hooks for 1.8 mm dia 41 mm grid distance

A set of hooks for a grid wall. It fits to grid wall with 1.8 mm diameter and 41 mm distance between the grids.

There are two versions available, the “low hook” and the “top hook”. Both versions are either 50 or 100 mm long and have a diameter (width) of 5 mm.  If you want to print a lot of hooks, I recommend the “top hook” because you can fit considerably more hooks on a single plate. You can find additional plates in each profile that contain as many hooks as I managed to squeeze onto a single 256x256 mm plate.

Printed with PLA+ and PETG. For durability reasons, PETG or PLA+ is recommended over basic PLA.