oasis live 25 hueforge

oasis live 25 - hueforge

 

Boost MeI'm happy about a boost

 

If you resize the model make sure you do not scale the Z axis or the print colors will not be in the same position

 

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 200x200mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 1.9mm

 

Filaments Used:
    PLA BambuLab Basic Black Transmission Distance: 0.6
    PLA BambuLab Basic Beige Transmission Distance: 8
    PLA BambuLab Basic Jade White Transmission Distance: 5
 

Swap Instructions:
    Start with Black
    At layer #8 (0.72mm) swap to Beige
    At layer #13 (1.12mm) swap to Jade White for the rest.