Starlink cable management

I installed Starlink outside the house, and printed parts I designed to be printed in TPU

• a passthru to pass the cable fru the wall. I had an area with a 20 mmm wood plate. I did a 40 mm hole into the wood. That is requred to pass the cable with its connector. The passthru is printed in two parts, and will just let the cable go thru.
• some cable retainers, designed for the Starlink cable (8mm diameter) and 2mm diameter nails. I've printed 10 initially, but added 10 additional one in the slice profile as I found 10 to be too short in my case :)

Both parts can be printed without supports. I printed them in TPU.