Dish Sponge + Cloth Holder

Dish sponge and cloth holder with drainage. High cloth holder arc so you won't have to fold the cloth which in turn makes it not fall down easily and also being out of the way for placing sponge.

Tray with feet so water won't accumulate underneath. 

 

Feet has a slot for optional hot glue application. Increases friction significantly.

Drip part can be warmed up and bent further down if preferred.

 

4 drain versions: Center, Left or Right hand side and a No drain version.

 

Height alternatives: Height from tray grid to arc top:

• 200mm / 7.9in - Original - 224mm / 8.82in total height.
• 190mm
• 180mm / 7.1in
• 170mm
• 160mm / 6.3in

Bench to tray measurment is 24mm / 0.95in for drain versions and 19mm / 0.75in without.

 

Feet riser alternatives: If you have inset sink with higher brim, this could help. Original feet height is 2.5mm.

• +1.5mm - 4mm tot.
• +2.5mm - 5mm tot.
• +3.5mm - 6mm tot. 

Uses support to allow for fixed feet and drip.

 

Hope you like it!

Boost Me