Everdell Complete Collection Resource Containers

This is a set of containers for the Everdell board game, specifically the complete collection from Kickstarter. The tray has room for all the tokens, and also includes space for each container! I decided to make my own, so basically I made good use of the “Loft” function in Fusion 360, and designed them all to fit inside the molds provided in the box. 

You may not need to bring them all out on the board when playing, but I'm finding them handy just to get the tokens out of the big red tray.

They all sit in with some tolerance to not get stuck, and are just tall enough to allow the plastic tray lid to snap in place to prevent spillage. There's no need for lids while in the box, but if you want some created for when they're not in the box, just ask.

Update: Nov 6 2022: The berry basket's 3mf file is only meant for PrusaSlicer due to the negative volume at the bottom. I've also made a new STL with a similar curve which should work just as well.

Update: Nov 23, 2022: Playing the game for a bit now, I'm realizing the containers are a bit big for the board. They're a bit tall, blocking the cards and the view of the events, and are sometimes twice the capacity they need. I've just resized most of them (80%/80%/65% X/Y/Z) in PrusaSlicer to make them more suitable for the board, but the stump I've remodelled properly to be shorter and have a larger inner cavity. The third picture shows the resized containers, much more suitable for the board.

Printing Instructions:

Keep in mind, in addition to printing one of each container, you'll also need to print 1 more acorn and 2 more nut containers for a complete set. 

Print them as oriented in the model in pretty well in any filament and infill you want. PolyLite Silk Blue PLA really looks great with the pearl container.

I recommend a small support ridge at the bottom due to the curves of some of the trays. It'll give a cleaner bottom edge especially on the boat, shell, basket and acorn.

The tree stump's texture comes from the PrusaSlicer's default fuzzy skin function. I also tried it on the nut with half the default values for a more subtle texture and it looks pretty good! It also hides the seams very well.

The insert for the large empty space is located here:

https://www.printables.com/model/334406-everdell-complete-collection-additional-insert

Also, check out my other Everdell-related accessories:

https://www.printables.com/model/326033-everdell-player-resource-tray

https://www.printables.com/model/317019-everdell-special-event-card-stands-44x66mm

Note: Some of these are sourced out and adapted from other prints.

The resource basket: https://www.thingiverse.com/thing:4715628

The mine cart from: https://www.thingiverse.com/thing:2418854/files