Seamless MedCase Keychain

Boost MePlease boost if you like my model

 

Please do NOT change any of the settings. If you change them then the threads may not line up properly. If you do by accident please make sure these settings are set to the following:

 

Layer height - 0.1mm

Initial Layer height - 0.18mm

Wall generator - Arachne

 

There are also some filaments that this did not work on for some reason. I had the best results with PLA metal filament and PLA Matte. PLA silk ive had mixed results with. I can verify that it does not work with multi color filament.