February 5, 2024
Description
🍌 Peeled Banana Lamp 🍌
I know you all love bananas, and now you have the chance to light up your room with this stimulating statement piece.
The lamp is designed to work with a G9 LED lightbulb, otherwise, you only need 1x G9 lamp socket, 2x M3x16mm screws, 1x power cable fitting for your country, and some CA glue.
How to assemble:
Attach the endpiece to the banana; you can use a piece of 1.75mm filament as a center point.
Screw the lamp socket to the lamp plate.
Pull the power cable through the banana and attach it to the lamp socket, I used some Wago clamps for it, but there are other ways that work just as well.
Fit everything in the banana, once it sits well, fix it in place with CA glue.
Put the lampshade on, don't glue it so you can change the lightbulb if needed.
Put the shell over it, make sure it is aligned so that the banana sits nice and flush on the ground, then glue it in place.
🍌Enjoy your glowing banana!🍌
You may also like:
License:
Standard Digital File License
Sakul
