NO AMS NEEDED tatered flag light switch cover

This should fit a standard light switch.  It is a tatered american flag top .  It is 2 ¾ in wide,  0.296 in tall, and nearly 6 in long(to add to the tater) with a 1/8 in dent in the back.  It is also printable without an ams.  if you don't have and AMS you will have to pay attention to which layer it is on. if you have a 0.4 nozle you will need to pause the print, go to the filiment and unload it, and switch the color from blue to white on layer 21, on 35 you will need to do the same and switch the color from white to red the same way you did before. (you will not be able to change the filiment settings).  Or you can download the nonAMS print profile which will pause the print at the beginning of layer 19 and the beginning of layer 21.you also will have to use your own screws that should already be in your light switch cover. Just unscrew the skrews, take of the former cover, put on the new one, and screw them back in.  

I hope you enjoy and please leave a comet and let me know what you think

Enjoy