Ceiling Fan Chain Pulls Fan Switch Light Switch

No more guessing which chain switch to pull for the fan or the light. 

Simple print and pretty easy assembly.

**Change log 9/2/25** improved bulb and light clips to help prevent breakage per request

Set up for print per object 2 plates but you can print individually if you prefer. I test fit it for the A1 mini plates as well and it should fit all printers as is.

Removing support from the bulb and the light is easiest done by gently twisting and rocking the support it will eventually loosen and slide or twist right off

Remove the old chains from your current pulls and feed them through the holes, then snap in the bulb and light pieces to cover them. (see pics) 

The clips are tiny but you will most likely need to print them to replace the larger existing clips included on most fans. Just slide them under the first ball and lower it and chain into the hole as shown in pics