Hello FPV community!
Here I share with you PVC 1" pipes connectors so you can build your own 5x5 Double Gate Tower for your practice or MultiGP chapter.
Objectives for this projects were as follows:
- dimensions compatible with official MultiGP recommendations published here
- lower number of different PVC pipes sizes to simplify the assembly (you'll need only two)
- relatively small size of single PVC pipe for easy transportation
- stable structure without difficult to see ropes
- customisable support structure with two default options (for low and higher wind velocity, or indoor and outdoor usage
Everything was designed for PVC 1" water pipe bought here
5x5 Double Gate Tower is build of:
- 3D printed parts:
- 2 x Part A -- T Base Connector
- 14 x or 6 x Part B -- Coupler (accordingly for outdoor version or indoor version)
- 2 x Part C -- T Connector
- 2 x Part D -- Elbow Connector
- 2 x Part E -- Y Connector
- 4 x Part F -- half Y Connector
- PVC 1" pipes segments:
- 4 x 104 cm segment
- 24 x or 16 x 88,5 cm segmen (accordingly for outdoor version or indoor version)
Following two pictures will help you assemble the tower:
Happy printing and see you in the sky :D
I almost forgot … If you want to add a laptimer for your single practice sessions check out my Sci-Fi case for PhobosLT Laptimer here !
Gordo3D
