Simple Slat Wall Business Card Holder - Version 2

Updated version 2 of my simple slat wall business card holder.

 

Original Version:

 

https://makerworld.com/en/models/1390860-simple-slat-wall-business-card-holder?replyId=2738446&replyType=1#profileId-1441022

 

Thanks to user @marcusg73 for the suggestion to remove some of the hanger material to save on support material.  I also took the opportunity to even up some of the dimensions on each side that seemed to not be symetrical (the original was one of the first things I ever designed in fusion, so apparently I didn't get some of the measurements exactly right! )

This version cuts the print time down by about 12 minutes, and reduces material use by about 14.5 grams give or take using the attached profiles.  Your mileage may vary.

It appears just as strong as the previous version, doesn't seem to sag under the weight of the cards, and once the cards are in the holder you can't really see the cut out.

Print standing up on it's bottom with regular supports (tree supports seem to have less bridge quality across the slat bracket section).  The supports pull off easily.

 

Boost MeBoosting me is free and it helps me keep creating models!