Masai Warrior Figurine with Spear & Shield

🗿 Masai Warrior Figurine with Spear & Shield

This highly detailed 3D printable Masai Warrior figurine is based on a scan of an authentic Masai carving, capturing the traditional stance, shield, and spear of the warrior with striking realism.

The completed model stands 173 mm tall and makes an impressive decorative piece for shelves, display cabinets, or cultural collections. The model scales well if you wish to print it larger or smaller, while retaining excellent surface detail.

🛠️ Assembly & Design Notes

• The spear is printed as a separate part to ensure clean details and reliable printing.
• During assembly, carefully remove support material from the hand grip hole to allow the spear shaft to fit correctly.
• Once cleaned, the spear slides neatly into place with no additional hardware required.

🎨 Materials & Colour Variations (Tested)

This model was successfully printed using the following filaments:

• Main figure:
  • Bambu Lab PLA Basic White
  • Sunlu Silver Silk PLA+
• Spear shaft:
  • Bambu Black Walnut Wood PLA
• Spearhead:
  • Sunlu Silver Silk PLA+
  • Sunlu Copper Silk PLA+

You can print the spear in one colour or multiple colours, depending on your printer setup and personal preference. Feel free to experiment with different filaments to achieve your desired finish.

🖨️ Print Setup & Supports

• Height: 173 mm (scales well)
• Supports: Tree & Organic supports enabled
• Print Plates:
  Each of the three plates uses slightly different print profiles to best suit the individual parts and their geometry.
• Assembly: Simple push-fit spear

🙏 Credits

The spear design is adapted from an existing model on Printables.
Full credit and thanks to MODElos Creaciones for their excellent work.

Spear by MODElos Creaciones – Downloaded from Printables.com