Hunter Bad Batch - Dummy 13 Remix

This Dummy 13 model is a remix of Hunter from Bad Batch by @Ben_W. 

The color scheme is close to the suit Hunter wears in the animated series.

The model size was increased to 250% to show the detail better and match other models I have which makes it about 13 ½" tall.

Everything was printed on an A1 Mini but can be printed on any other machine.

The Dummy 13 frame was printed in PLA with 3 walls, 20% gyroid infill and fuzzy skin painted on all the ball joints to make it more poseable.

Mine is more of a display piece but it is still very sturdy with PLA. If you fill like you needs it to be stronger you can print it in PETG.

This rest of the model only needs to be printed in PLA. I used the same walls and infill for the armor parts as I did for the Dummy 13 frame but you can lower the walls to 2 and the infill to 15% or 10%.

The filament used:

Polymaker - Panchroma = Matte Ash Gray

Polymaker - Panchroma = Matte Charcoal Black

Polymaker - Panchroma = Matte Lava Red

Overture = Matte White

Overture = Matte Light Gray

If you chose to print the Dummy 13 frame in PETG:

Polymaker - Polylite PETG

Of coarse you can print everything in Bambu filament or different manufactures filaments and use different printer settings but your results may vary. I have added the Bambu filament you can use in the BOM.

I hope you enjoy this model and make sure you check out Ben's other models.