Derpy x Sussy, KPOP Demon Hunters Bookmark

Had many requests to do Derpy. Finally able to create one colorful and detailed enough to share. The details are better represented in an 0.2mm Nozzle. An 0.4mm Nozzle will be missing some finer points, especially to Sussy the magpie.

Derpy x Sussy, KPOP Demon Hunters Bookmark

Pictures shown are printed in an 0.2mm Nozzle
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:

PLA BambuLab Basic Black Transmission Distance: 0.6

PLA BambuLab Basic Cyan Transmission Distance: 3.5

PLA BambuLab Basic Jade White Transmission Distance: 4.6

PLA BambuLab Basic Red Transmission Distance: 4

PLA BambuLab Basic Yellow Transmission Distance: 6

This print uses 5 unique filaments

Swap Instructions:

Start with Black

At layer (1.04mm) swap to Cyan

At layer (1.36mm) swap to Jade White

At layer (1.52mm) swap to Red

At layer (1.76mm) swap to Yellow

At layer (2mm) swap to Jade White for the rest.

This is a five color print. Use this tutorial by Cloudy Nostalgia to print more than 4 colors on 1 AMS.

Can be resized to accommodate your printer or preference by adjusting the X and Y axis the same percentage while leaving the Z axis at 100%. The best way to achieve this: With Uniform Scale checked, adjust the Y axis to the desired size (this will ensure the X axis is the same proportion as the Y axis), uncheck the Uniform scale, adjust the Z axis back to 100%, slice plate, and print. Stringing may occur with Hueforge, just use a lighter to whisk them away.