September 15, 2025
Description
Hit that like and follow please
| Setting | Recommended Value |
| Layer Height | 0.12 mm (for fine detail) |
| Wall Line Count | 3 |
| Top/Bottom Layers | 5 |
| Infill Density | 15-20% (Gyroid or Cubic) |
| Printing Temp | 210–215°C (adjust for filament) |
| Bed Temp | 60°C |
| Print Speed | 50 mm/s (reduce to 35-40 mm/s for small details) |
| Retraction Distance | 0.8 mm |
| Retraction Speed | 40 mm/s |
| Cooling Fan | 100% (enable after first few layers) |
| Supports | Yes — Tree Supports, build plate only |
| Z Seam | Sharpest Corner or Back |
| Build Plate Adhesion | Skirt or Brim for safety |
License:
Standard Digital File License
SirPrintZAlot
