MiniCounter with +1/+1 and -1/-1, coin sized!

Version of the MiniCounter V2 with added markings

This might be the world's smallest 0-99 counter (Before some of you scales it down in the slicer :P)

Based on my previous original designs with added+1/+1 and -1/-1 markings for MtG.

Useful as counters on MtG or any board game you might think of.

0.2 nozzle recommended but 0.4 works too!

In slicer:

Choose “Objects” and select the colors you want!

If the dial feels tight to turn, scale it in your slicer (or your print might be messy, get a deburring tool ;) ). Percent or two bigger will fix most issues. This is caused by differences in filaments and printers. 

Assembly: Use a hard surface. After placing the halves together you can use your palm to press them together. If they do not connect with a snap, check that the dials are not misaligned, you can use a sharp object to maneuver them inside the casing.